Product Details

Features

The whole machine is controlled by Baumüller Servo Operating System.

Each Printing Station is driven by Double Servo. Imagine you have a 8-color HSR-340 inline flexographic press with 2 die

cutting stations & sheeting function. There will be 23 servo motors in total on this machine, which ensures the high precision of printing & auto-chromatography while the machine runs in a high speed.

It is very suitable for printing variety of film material,such as PET,BOPP,PVC,PP and so on

Specification

1. Unwinder 1set

♦ Max.diameter of unwinder 1050mm

♦ 3 inches air shaft

♦ Servo tension controlling system

♦ Paper breakage platform for Pneumatic clamping

♦ BST web guiding device

♦ Pneumatic Synchronization components adopted by Airtac company from Taiwan

♦ Corona treatment device can effectively increase the amount of ink on the film

♦ Dust cleaner : removing dirty of the surface of raw material

2． Second level tension part 1 set

♦ 1 sets of traction units, servo drive

♦ French Merobel tension

♦ Pneumatic clutch of high precision clip roller

3．color printing unit

♦ impression cylinder and plate cylinder used high -precision servo control technology

♦ sleeve cylinder for easy handling lightweight plate cylinder

♦ Surface hard aluminum guide roller

♦ Automatic inks pour into the ink tray

♦ Quick replacement scraper

♦ Pre-registration & Automatic registration system easier to operate

♦ Combination of UV LED, infrared and hot air drying : can be used printing for water based ink or UV ink

4. LED UV drying system and ARC drying system

♦ LED UV7 70% Using the performance of frequency conversion power supply, the same output power can save 30% more energy than ordinary lighting device.

♦ The power has two options, manual and automatic, which can control power step by step when manual, and follow automatically with the speed of printing machine, and can fine adjust the power of each color group separately.

♦ Small size, convenient installation

5. Rotary die cutting station (option)

♦ can be 3 unit of die cutting station

♦ Controlled by servo motor

♦ magnetic cylinder device

♦ Die cutting pressure indication device

♦ The upper part of the die cutting seat is equipped with the crane to replace the risk of manual handling. The upper part of the die cutting seat is equipped with the crane and the risk of replacing the manual handling is replaced by the top part of the die cutting seat.

6. Waste coil unit

♦ Full Servo driven Self-operation, automatically increasing Power with Winding diameter

♦ 3 inch shaft, with rotary gas supply joint

♦ Maximum waste diameter 900mm

♦ AIR shaft used for the rewinding

7. Rewinder device

♦ Maximum diameter 1050mm

♦ Pneumatic feeding mode

♦ 3inch shaft

♦ The output torque of frequency conversion motor can be adjusted according to the winding diameter at that time to ensure the stability of winding tension.

8. Conveyor optional

♦ controlled by independent motor

♦ can be added at the last sheeting station for IML label cutting, A4 size sheet cut

♦ belt design, up&down adjustment

Configuration

http://www.hongsheng-machine.com/